Start here
Getting started
The shortest path from a new Private CORS subscription to an operating base and rover correction stream.
Before you begin
You need an active Private CORS package and a GNSS base receiver capable of publishing a compatible NTRIP/RTCM stream over the internet.
Deployment workflow
Choose the package
Select the base-station, NTRIP client, and concurrent-rover capacity required by the project.
Choose the region
Select a cloud location suitable for the operating area. The control plane verifies availability before deployment.
Wait for caster status Active
Do not configure the receiver against an incomplete deployment. Use the hostname and credentials shown after provisioning succeeds.
Create the base / mountpoint
Create a mountpoint and base credential, then enter those values in the GNSS receiver's NTRIP Server/Source configuration.
Typical receiver settings
Caster host your-caster.privatecors.example
Port 2101
Mountpoint BASE01
Username base_01
Password ********
Output RTCM 3.x
No separate RINEX upload setting is required.The base publishes RTCM as normal. Private CORS performs the logger and daily RINEX generation on the server.